COMPARISON TABLE ARTICLES
Expert reviews and industrial insights.
Markforged Mark Two vs Onyx One: Practical Comparison
The Markforged Mark Two is the only choice for certified carbon fiber parts with repeatable fiber placement. The Onyx One lacks continuous fiber and a heated chamber, making it a nylon printer for prototyping under 15 MPa stress.
Moonraker: API Server for Klipper Printers
Moonraker is the open-source API server for Klipper-based 3D printers, enabling remote monitoring and integration with MES/ERP systems. It offers a modular control surface but requires investment in network security and hardware redundancy for industrial use.
Arlon Vinyl Buying Guide: DPF 8000, SLX, and 4500
After ten years wrapping trucks and trailers, here's my honest take on Arlon's DPF 8000, SLX, and 4500 series films. I cover edge lift, adhesive tack, liner release, and where each film works best.
Prusa MK4S vs MK4: A Hands-On Buyer's Guide
After two decades with FDM printers, I compare the Prusa MK4 and MK4S. Learn about the Nextruder gearbox failures, belt tension quirks, and thermal soak issues you won't see in the marketing. Practical advice for buyers.
Prusa MK4S vs MK4: What's Different and Should You Upgrade?
The MK4S fixes the MK4's heat creep and nozzle change headaches with a redesigned hotend. This guide covers frame, motion system, hotend differences, and ROI to help you decide between new purchase or upgrade.
Bambu Lab X1‑Carbon & X1E: An Industrial Architect's Buying Guide
Bambu Lab's X1‑Carbon and X1E are the first consumer machines with lidar first-layer inspection and active chamber heating. This guide breaks down pros, cons, and technical specs from a shop floor perspective.
Bambu Lab X1-Carbon & X1E: What You Need to Know
After 2,500+ hours using the X1E, I share the pros and cons of Bambu Lab's flagship printers speed, enclosure, material support, but also the vendor lock-in, high replacement part costs, and maintenance tips like lubricating rails every 200 hours.