Slicer Software
Expert reviews and industrial insights.
Three Chitubox Pro Auto-Support Failures and How to Fix Them
After dozens of failed prints, I found three critical Chitubox Pro auto-support issues. This covers why the algorithm underestimates peel forces and a manual workflow that dropped my failure rate from 40% to under 5%.
CraftPrint Bed Leveling Fixes
Troubleshooting the CraftPrint's common bed leveling problems: replace the stock springs with stiffer die springs, thermal soak the bed for 10 minutes after reaching temp, and clean the capacitive sensor tip with IPA every 200 hours. These fixes eliminate elephant's foot and first-layer adhesion issues.
Markforged Eiger Troubleshooting: Onyx, CFR, Nylon
Covers real-world fixes for Markforged Onyx warp due to thermal gradients, CFR print head jams from inconsistent tension, and nylon moisture causing brittle prints. Includes step-by-step procedures and hardware adjustments.
PrusaSlicer Organic Support Troubleshooting
Practical advice on PrusaSlicer organic supports: why they fuse or tip, and how to fix with settings like top contact Z, interface layers, and pillar link distance. Includes a simple test to find your ideal gap.
Fixing Warping and Delamination on Formware 3D Large Prints
Struggling with warping on your Formware 3D printer? The factory PEI sheet fails under high chamber heat. Replace with glass and Magigoo, level after thermal soak, and get reliable adhesion for ASA, nylon, and PETG. Includes a troubleshooting matrix.
Fixing Raise3D Bed Leveling, Retraction, and Filament Sensor
Three common Raise3D failures: bed leveling drift from thermal expansion, retraction issues with flexible filament, and false filament sensor triggers. Each with a tested fix from production use.
How to Fix Chitubox Hollowing Failures
Learn to avoid hollowing failures with correct drain hole size and placement, plus add a breather hole. Also covers phantom layer shifts caused by exposure issues and resin flow problems. Workshop-tested tips.
Three Lychee Slicer Problems and How to Fix Them
I've been using Lychee Slicer for years, and these three problems keep tripping people up. Here's how to fix exposure times that fail, islands the slicer misses, and printer file corruption. Real fixes, not marketing.
Common GrabCAD Print Problems and Fixes
I've been fixing Stratasys machines for years. Here are the two most common GrabCAD Print headaches: material profile corruption causing slice engine hang-ups, and license server handshake failures. Plus the actual fixes that work in the field.
Fixing Layer Shift in Simplify3D: Acceleration Settings
Layer shift in Simplify3D often comes from acceleration settings exceeding firmware limits. This guide shows how to check your firmware's max acceleration, adjust Simplify3D's defaults, and use preview mode to spot trouble. Practical fixes from a 20-year maker.
Anycubic Photon: Top 3 Printer Failures and Fixes
After three years running Photon S, Mono X, and M3s, this tear-down reveals the top three failures: FEP adhesion, LCD matrix death, and Z-layer shifts. Includes field fixes and software setting corrections.
Common Cura Slicing Errors: Missing Layers and Retraction Blobs
I've been running FDM printers since the RepRap days. Here are two annoying slicing problems I see often: phantom gaps from non-manifold meshes, and retraction madness causing stringing or blobs. I share the workflows that actually fix them.